cecotec Conga 8090 Ultra, Инструкция по эксплуатации

Страница: 40 / 44

40 | CONGA 8090 ULTRA
ENGELSK
It is recommended a weekly robot clean-up, depending on its use.
7. Battery replacement and charging
Do not use any other battery, power adapter or charging base than the one
officially provided by Cecotec.
Do not use non-rechargeable batteries.
Do not remove, dismantle or attempt to repair the battery or the charging
base.
Do not place the charging base near heat sources.
Do not use a wet cloth to wipe any of the parts of this product.
If the robot is not going to be used for a long time, remove the battery from
the product and store it in a dry and safe place. It is suggested to charge the
battery every month in order to avoid damage to the battery.
Do not dispose of waste batteries at will. It is suggested to hand them over
to professional organisations for correct treatment.
8. Troubleshooting
Problem
1. The robot does not start up or does not clean.
2. The robot cannot charge or return to the charging base.
3. The robot does not work properly.
4. The robot emits a strange noise during cleaning.
5. The robot does not clean efficiently or dust leaks from the robot.
6. The robot could not connect to Wi-Fi.
7. The robot did not carry out the scheduled cleaning task.
8. The robot does not return to the charging base after spot cleaning or
after changing starting position.
9. The robot does not resume cleaning.
10. The robot is always offline.
11. Connection between the mobile phone and the robot failed.
Solution
1.1. The robot cannot operate with low battery. Allow it to charge before
operating it.
1.2. The room temperature is below 0ºC or above 50ºC. Operate the robot
in a room where the temperature is between the stated temperature
range.
2.1. There are too many obstacles near the charging base, relocate the