cecotec BREEZECARE 3500 WARM, Руководство пользователя

Страница: 22 / 51

BREEZECARE 3500 WARM BREEZECARE 3500 WARM 43 42
ENGLISH ENGLISH
The humidification
capacity is too low
There is natural or artificial
air replacement in the room
which interfere the increase
of %RH.
Check if doors and windows are
closed.
Check if there is no air
conditioning working in the room.
The air inlet grids and nozzle
could be blocked. Remove any blocking items from
the grids and the nozzle.
Too much scale in the water
basin.
Clean transducer.
The humidity selected rate is
too low.
Increase mist output speed.
Increase humidity setting rate.
Water is too dirty or water kept
too long in the tank. Clean water tank, change to fresh
clear water.
The ambient
humidity is too high
Humidifier is working in
Continuous mode.
Change the mode.
The humidity target is too high. Select a lower %RH target.
Room is not well-ventilated
Open a window to ensure proper
air flow for the humidifier or
move the humidifier to a better
ventilated room.
Excess water tank has spilled
while filling the water tank or
replacing the water tank back
onto the base.
Wipe off excess water from the
top and bottom of the base before
replacing the water tank.
There is
condensation in the
room
The room temperature is too
low.
Heat the room up.
The mist suddenly
stops coming out
Programmed timer period has
run out.
Turn humidifier on.
The water shortage indicator
is on.
Refill water tank.
The target humidity level is
reached.
Incorrect humidity
level is being
displayed.
Room is larger than the
effective range of the
humidifier.
Move the humidifier to a room
which is with suitable room size.
Moisture has built up inside of
the humidity sensor.
Turn off the humidifier and allow
the humidity sensor to completely
air dry before resuming use.
The nozzle is facing the
direction of the humidity
sensor.
Turn the nozzle so that it is facing
away from the humidity sensor.
Humidity sensor is broken or
defective.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
Control panel does
not work
Hands are too wet when
operating control panel. Keep hands dry while operating
the control panel.
Humidifier has malfunctioned.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
White dust
appears around the
humidifier
Water being used has a high
mineral content.
Use distilled water with the
humidifier. If distilled water is not
available, use purified or filtered
water. Remember to clean water
tank at least once a week.
Humidifier was not properly
cleaned after last use.
Clean humidifier.
Mist is coming out
from the base Water tank is not positioned
correctly.
Turn off and unplug the humidifier,
then align the water tank cover
with its respective opening in the
inner chamber.
Mist fog coming out
from around nozzle There are apertures between
the nozzle and water tank.
Reinstall the cover and check if
the nozzle is well plugged in the
cover.