BOLERO DRESSCODE 6000 / 7000 / 8000
63
ENGLISH
Cleaning the inlet filter
Note: The inlet filter must be cleaned when there is little water.
Washing the filter in the tap
Fig. 27.
Close the tap.
Remove the water supply hose from the tap.
Clean the filter.
Reconnect the water supply hose.
Washing the filter in the washing machine
Fig. 28.
Screw off the inlet hose from the backside of the machine.
Pull out the filter with long nose pliers and reinstall it back after being washed.
Use the brush to clean the filter.
Reconnect the inlet hose.
Note: If the brush is not clean, pull out the filter and wash it separately. Then, reconnect it and
turn on the tap.
Cleaning the detergent dispenser
Press down the arrow on the softener cover inside the dispenser drawer.
Lift the clip up and take out the softener cover and wash all grooves with water.
Replace the softener cover and push the drawer into position.
Pull out the dispenser drawer by pressing the A. Fig. 29.
Clean the dispenser drawer under running water. Fig. 30.
Clean inside the recess with an old toothbrush. Fig 31.
Insert the dispenser drawer. Fig. 32.
Warning: Do not use alcohol, solvents or chemical products to clean the washing machine.
Cleaning the drain pump filter
Warning:
Be careful with the hot water!
Allow detergent solution to cool down.
Unplug the machine to avoid electrical shock before washing.
The drain pump filter can filter the yarns and small foreign matters from the washing.
Clean the filter periodically to ensure proper operation of the washing machine.
Open the lower cover cap. Fig. 33.
Rotate 90 °C and pull out the emergency drain hose and take off the hose cap. Fig. 34.
When it is fully emptied, reset the drain hose. Fig. 35.
Open the filter by turning it counterclockwise. Fig. 36.
02314_02315_02320_Bolero DressCode 6000_7000_8000_Manual_YV_01200903.indd 63
02314_02315_02320_Bolero DressCode 6000_7000_8000_Manual_YV_01200903.indd 63
5/10/20 13:10
5/10/20 13:10