BIGDRY 5000 ADVANCE CONNECTED
BIGDRY 5000 ADVANCE CONNECTED
31
30
ENGLISH
ENGLISH
Mode description
Dehumidification mode
If the humidity is 3 % lower than the set humidity, this function will turn off automatically. If it
is 3 % higher, it will turn on automatically.
Auto dehumidification
Sets the humidity to 55 %.
Forced dehumidification
Under this mode, humidity cannot be set and the air speed cannot be modified.
Rapid drying
Under this mode, humidity cannot be set and the air speed cannot be modified.
Ventilation
Humidity level cannot be set and adjustable speed.
Sleep mode
Reduces the noise the device makes when operating.
Connectivity and Wi-Fi
In order to link your product with our App, please follow the below steps.
Download the EnergySilence App from Google Play or App Store.
If it is the first time you use it, register an account. If not, log in.
Once you have entered the App, press “+” on the top right-hand corner and tap “BigDry 5000”.
Turn on the device and tap the Dehumidification mode button for 5 seconds until the Wi-Fi
indicator starts blinking quickly.
Enter your Wi-Fi password and press confirm.
Then, the linking process will start automatically.
If the automatic linking process fails, press the same button again until the indicator blinks
slowly.
Confirm the Wi-Fi password again and follow the instructions indicated by the App.
5. CLEANING AND MAINTENANCE
Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the device’s surface. Cleaning the device with a product
containing chemicals may change the color of the unit.
Do not immerse the appliance in water or other liquid.
Do not use abrasive cleaners or scouring pads to clean the product.
Make sure your hands are dry before handling the plug or switching on the appliance.
If the device is not going to be used for an extended period:
Empty the water in the tank and remove it, then clean it and dry it and assemble it back. Clean
the filters. Place the device upright and avoid direct sunlight.
Cleaning the filter
Place the device vertically and avoid sun light.
Cleaning the carbon filter
Fig. 5
We recommend doing this every two weeks.
The device’s capacity may be reduced if the filter is clogged.
Continuous water drainage
The unit features a continuous-drainage port. Using a plastic pipe (with an inner diameter
of 10 mm), insert it into drain hole (on intermediate plate), reach out from side of water tank,
install it in place, and arrange the drain pipe.
The water in the tank can be continuously drained out from the continuous port on the unit.
