ENGLISH
1
6
READY WARM 360°
3. BEFORE USE
1.
Take the product out of the box and remove any packaging materials.
2.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
3.
Place the heater on a flat and stable surface.
4.
Set the power-level switch at “0” and plug the product’s cord into an earthed power
supply.
4. FUNCIONAMIENTO
Power-level knob
SYMBOL
FUNCTION
O
OFF
FAN
I
LOW-POWER HEATING
II
HIGH-POWER HEATING
•
Turn the power-level knob and the thermostat to maximum for fast warming up of a
room. Once the room has reached the desired temperature, set it at a lower temperature
to reduce electrical consumption and to prevent the room from warming up too much.
THERMOSTAT
•
Turn the thermostat to maximum and select the desired power level. Once the room has
reached the desired temperature, turn the thermostat anticlockwise until the selected
temperature. The thermostat will turn on and off automatically in order to maintain the
selected temperature.
•
Before switching off the appliance, operate the fan function for 5-10 seconds.
SAFETY TIP-OVER SWITCH
•
The heater is designed to turn automatically off when tipped forward or backward. The
unit will automatically turn on once it is returned to its normal upright position.
