DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL
57
56
ENGLISH
ENGLISH
3. PRODUCT INSTALLATION
- Place the device on a flat, stable and dry surface. Make sure the product does not stand on
the power cord. Fig. 3.
- Avoid direct sunlight and ensure sufficient ventilation. Fig. 4.
- Remove the cardboard box and Styrofoam packing.
- Lift the washing machine and remove the base packing. Make sure the small triangle foam
is removed with the bottom one together. If not, lay the unit down on one of the sides, then
remove the small foam from the unit bottom manually. Fig. 5.
- Remove the tape securing the power supply cord and drain hose.
- Remove the water supply hose from the drum.
Removing the transport bolts
- The transport bolts must be removed from the backside of the device before installing the
washing machine.
- The transport bolts will be necessary again when moving the product, so make sure they
are kept in a safe place.
In order to remove the bolts:
Fig. 6.
- Loosen the 4 bolts with a spanner and then remove them.
- Cover the holes with the transport hole plugs in the box.
- Keep the transport bolts properly for future use.
Levelling the washing machine
Warning
The lock nuts on all four feet must be screwed tightly against the housing.
- Check if the legs are closely attached to the cabinet. If not, please turn them to their original
position and tighten the nuts.
- Loosen the lock nut to turn the feet until it closely contacts with the floor.
- Adjust the feet and tighten the washers with a spanner. Make sure the machine is steady.
Fig. 7.
Water supply hose connection
Warning
Do not kink, crush, modify or repair the water supply hose.
For the models equipped with a hot valve, connect it to a hot water tap with the hot water
1. PARTS AND COMPONENTS
Fig. 1.
1.
Top cover
2. Control panel
3. Power cord
4. Drum
5. Service filter
6. Drain hose
7. Door
8. Detergent tank
9. Water supply hose
Accessories
Fig. 2.
1.
Transport bolt gap
2. Cold water supply hose
3. Hot water supply hose (optional)
4. Drain hose bracket (optional)
5. Instruction manual
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- Unpack the appliance and keep the original packaging and materials in a safe place.
It will help prevent any damage if the product needs to be transported in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and accessories are present and in good conditions. If some are missing
or not in the best condition, contact the Technical Support Service of Cecotec immediately.
- Keep all packaging materials away from children.
- Before using the wash machine, the product shall be calibrated.
- Before washing the clothes for the first time, the product shall be operated in a complete
cycle without the clothes inside.
- Make sure that all pockets are empty. Sharp and rigid items such as coins, brooches, nails,
screws or stones may cause serious damage to this machine.
