cecotec 01582, Инструкция по эксплуатации

Страница: 19 / 22

CAFELIZZIA 790 STEEL | 19
ENGLESK
5 . Fejlfinding
Problem Cause Solution
Coffee does not
come out
No water in tank.
Coffee grind is too fine.
There is too much coffee in the
filter.
The device is not turned on or con-
nected to the power supply.
Coffee has been tamped/
compressed too much.
Add water.
Grind medium-ground coffee.
Fill filter with less coffee.
Connect the unit to a power
supply and turn it on.
Refill the filter basket with cof -
fee, do not tamp too much.
No water/steam There is no water in the water tank
or it is not installed properly.
The machine is not preheated.
Fill the tank with water and turn
on the device.
The machine needs to be pre -
heated before coffee can be
brewed. Once the machine is
preheated, the light indicator will
turn on.
Coffee comes out
around the edge
of the portafilter
Portafilter not rotated to full lock
position.
There is ground coffee on the edge
of the filter.
There is too much coffee in the
filter.
Rotate filter holder to full lock
position.
Wipe off the rim.
Fill with less coffee.
Coffee is too light Coffee is not enough ground or the
grounds are not pressed enough.
Replace the coffee powder and
flatten it with the measuring
spoon/coffee tamper.
No steam Steam tube is blocked.
The steam knob is not set to the re -
quired position or preheating is not
completed.
Use a small wire through the
steam hole and make sure to
clean the tube after each use.
Turn the steam knob to the
steam position and wait for the
preheating process to complete.
Coffee is not
brewed well
Too much or too little coffee pow -
der.
1 cup of coffee requires 1 coffee
spoon, and must be pressed
down. Coffee powder cannot be
too thick or too fine. Too thick
coffee cannot be completely
extracted, too fine will affect the
amount and quality of coffee.
Milk is not pro-
perly frothed
The milk used is not suitable for
this function. The steam function
has been activated before the light
indicator has turned on.
Use whole milk.
Steam can only be released after
the steam indicator light changes
from flashing to steady light.
The light indica -
tors blink
The temperature is too high after
steaming.
Cool down the device.