CEBORA S.p.A.
8
3.302.155
22/01/04
Correct?
Correct?
q
Release the start button, holding the torch in welding position.
♦
The arc shuts down immediately without the wire sticking to the workpiece, the
wire stops exiting the torch, and gas flow is interrupted.
NO (see 3.3.8).
YES
q
Turn the knob (A) to the central position (spot welding).
q
Move the torch near the workpiece and press the start button.
♦
Begin welding, that lasts only for the time set by knob (A). Once this time is
elapsed the arc shuts down immediately without the wire sticking to the
workpiece, the wire stops exiting the torch, and gas flow is interrupted. For a new
spot welding, release and press again the start button.
NO (see 3.3.7, 3.3.8).
YES
REGULAR OPERATION.
