Cebekit C-9877, Руководство пользователя

Страница: 14 / 39

C-9877
Step 3
：
Shield Module (interface)
We will use:
（
1
）
Robot
1
（
2
）
Shield Module
1
Figure 3- 1
：
Installation of the Shield module.
Carefully, connect once again the module on the main control board
Attention with the Shield module and the Main control circuit
1.- Before connecting, carefully check the position of the Shield module
and the main control circuit connector.
2.- Check, one by one, that all the pins are correctly aligned with the
holes in the main control circuit connector.
Check, one by one, that all the pins are correctly aligned with the holes
in the main control circuit connector
These two points should be carefully checked to avoid a short circuit when the robot is
supplied and damage it irreparably.