GENERAL WIRING MAP.
OUTPUT. CONNECTION OF THE LOAD.
The output Module (I-55) is controlled by a relay, allowing any load until 5 A. as
maximumconsumption. The relay has 3 output terminals the normally open at quiescent (NA), the normally closed at quiescent (NC) and
the common. The operating of this mechanismis the same as a switch with two (2) terminals NA and common, if you wish that the output
will be activated during the timer, or between the NC and the common to obtain the reverse operating.
VDC and to operate at 220 VAC.
OUTPUT. DO NOT FORGET.
When the module is working and according to its load, it could happen an incorrect operating of the output.
If it is the case, you have to install a circuit between 2 relay's contacts used for the
www.cebek.com
