GB
29
OTHER SETTINGS
Hold down the button
for 3 seconds to enter the settings menu, as described in the previous
paragraph. The display will show the first screen:
Starting from this screen, you can perform the following operations:
Selecting the menu language
Press the button
twice to display the page:
Press the
to confirm. The display will show the screen:
Press the button
or
to select one of the 5 languages: Italian, English, Spanish, German
and French. Press the button
to confirm.
Start button setting
According to the factory setting, the appliance distributes coffee only as long as the start button
(7 Fig. 1) is held down.
If this button is released during distribution of a shot, the motor stops, the system goes into pause
status and the display shows the time remaining to complete the shot and the message
“
WORKING
”. In addition, to highlight the fact that the distributed shot has not been completed, the
LED for the shot selected flashes. At this point, to complete the dose just press the start button
(7 Fig. 1) again with the filter-holder and keep it pressed until the shot is completed.
Instead, if you no longer wish to complete the dose, press one of the two shot buttons
or
to cancel the current shot and return the system to READY position.
However it is possible to change this function by programming the start button (7 Fig. 1) in
pulse
mode
. With this setting the distribution of coffee will begin with the simple pressing of the start
button (7 Fig. 1) and will end only at the end of the time set for the distribution of the required shot.
Set time
single shot
Set
Language
Use b -
Language English
