CEA MATRIX 2200 AC/DC, Руководство оператора

Страница: 3 / 40

3
• TIG
- Excellent TIG welding characteristics.
- High frequency arc striking of TIG welding, precise and effi-
cient even from long distance.
- Using special TIG torches allows remote adjustment of weld-
ing current directly from the torch.
- The diameter of the electrode used is set to allow greater con-
trol of the ignition and dynamics of the arc.
- Standard built-in pulsation (from 0,5 to 2000 Hz) with provi-
sion for entering the SYN Pulse function.
- Square, mixed, sinusoidal, or triangular wave shape selector.
- Square welding wave frequency balancing / regulation and
“Balance Plus”.
• MMA
- The VRD (Voltage Reduction Device) can be activated, which
reduces voltages to below 12 V, which means that the weld-
ing machine can be used in ambient conditions in which there
is a high electrical risk, thereby providing maximum opera-
tor safety.
- “Arc Force” adjustable to select the best dynamic character-
istics for the welding arc.
- “Hot Start” adjustable to improve ignition with particularly dif-
ficult electrodes.
- Anti-sticking function to avoid the electrodes sticking.
MATRIX 2200 AC/DC
• The PFC device makes the wave form of the current absorbed si-
nusoidal, which results in no harmonic disturbance on the mains
and optimisation of absorption, which allows you to use the gen-
erator’s full power with a 16 A fuse, as well as ensuring great-
er protection of the welding machine against fluctuations in the
power supply voltage.
MATRIX 3000 AC/DC R
• Suitable for use on all robotic systems.
• Optional “RoboMAT 1” interface that handles all process start/
stop signals, regulation of the principal welding parameters, and
also acts as a flexible, efficient interfacing system that meetsall
Analogue / Digital connection requirements.
Usage limits (IEC 60974-1)
The use of a welder is typically discontinuous, in that it is made up
of effective work periods (welding) and rest periods (for the posi-
tioning of parts, the replacement of wire and underflushing opera-
tions etc. This welder is dimensioned to supply a I
2
max nominal
current in complete safety for a period of work of X% of the to-
tal usage time. The regulations in force establish the total usage
time to be 10 minutes. The work cycle is considered to be X% of
this period of time. If the permitted work cycle time is exceeded,
an overheat cut-off occurs to protect the components around the
welder from dangerous overheating. Activation of thermal protec-
tion is signaled by “t° C” flashing on control panel display (for fur-
ther information see the MTA control panel manual). After several
minutes the overheat cut-off rearms automatically and the welder
is ready for use again.
Technical data
The general technical data of the system are summarized in ta-
ble 1.
Table 1
Model
MATRIX 2200 AC/DC
MATRIX 3000 AC/DC
MATRIX 3000 AC/DC R
TIG MMA TIG MMA
Power supply 50/60 Hz
V 1~ 230 ±20% 3~ 400 ±20%
Power supply: Z
max
Ω (*) 0,092
Input power @ I
2
Max kVA 6,5 7,0 9,6
Delayed fuse (I
2
@ 100%)
A 16 10
Power factor / cosφ
0,99 / 0,99 0,95 / 0,99
Efficiency degree η 0,77 0,76 0,81
Open circuit voltage V 100 100
Current range
A 5÷220 10÷180 5÷300 10÷250
Duty cycle @ 100% (40°C)
A 140 120 210 190
Duty cycle @ 60% (40°C) A 180 150 250 220
Duty cycle @ X% (40°C) A 220 (30%) 180 (30%) 300 (35%) 250 (40%)
Usable electrodes
mm 1,2÷2,4 1,6÷4,0 1,2÷4,0 1,6÷5,0
Standards
IEC 60974-1 • IEC 60974-3 • IEC 60974-10 IEC 60974-1 • IEC 60974-3 • IEC 60974-10
Protection class
IP 23 S IP 23 S
Insulation class
F F
Dimensions mm 465 - 390 - 185 495 - 390 - 185
Weight kg 15,5 19
IMPORTANT:
These systems, tested in accordance with the requirements of the
EN/IEC 61000-3-3
standard, satisfy the requirements laid down by the
EN/
IEC 61000-3-11 standard.
MATRIX 2200 AC/DC
(*) This equipment meets the requirements laid down in the EN/IEC 61000-3-12 standard on harmonic currents.
MATRIX 3000 AC/DC - AC/DC R
This equipment complies with EN/IEC 61000-3-12 provided that the maximum permissible system impedance Z
max
is less than or equal to 0,092
at the interface point between the user’s supply and the public system. It is the responsibility of the installer or user of the equipment to ensure,
by consultation with the distribution network operator if necessary, that the equipment is connected only to a supply with maximum permissible
system impedance Z
max
less than or equal to 0,092.