CDVI U4GO A10U48, Руководство пользователя

Страница: 27 / 32

EN EN
A6U48 - A10U48
Mid & Long Range UHF Reader
26 27
m e n u
C o n f i g
m e n u
C o n f i g
C o n f i g
R e l a y 1
C o n f i g
R e l a y 2
R e l a y 1
P u l s e
R e l a y 1
S t e p
R e l a y 1
T i m e d
R e l a y 1
D i s a b l e d
h h m m s s
0 0 : 0 0 : 0 0
Use “P1” and “P2” to set the
values, then “P3” to confirm and
shift left, press “P4” to go back .
W i e g a n d
B i t
B i t
2 6 B i t
W i e g a n d
F i l t e r
F i l t e r
A - - D
Set the Wiegand protocol to:
26, 30 or 44 bit (default 26-bit)
Select the buttons that will be use to
transmit the Wiegand data.
Scroll until
“menu Config”
then press “P3”
Scroll until
“menu Config”
then press “P3”
Scroll to desire
Wiegand setting
then press “P3”
Scroll to desire
relay setting then
press “P3” Scroll to desire
relay setting then
press “P3”
Wiegand Output Settings
Relay Output Settings
E d i t T X
N # 0 5 2
P o s 0 0 1
1 2 3 4 5 6 7 8
R e l a y 1
A B - -
R e l a y 2
- - - D
Relay activation per remote buttons
m e n u
C o n f i g
Scroll until
“menu Config”
then press “P3”
Select the remote buttons that activate the relay 1. Use
“P1” and “P2” to set the values, then “P3” to confirm
and shift right. [ Example: A & B].
Select the remote buttons that activate the relay 2. Use
“P1” and “P2” to set the values, then “P3” to confirm
and shift right. [ Example: D].
Press “P3” to return to the list or “P4” to exit.
The system shows the total number of remotes
memorized. [Example = 52]. Use “P3” to confirm and
display the list.
Scroll the list using “P1” and “P2” . Once found the
serial number of the remote to modify, press “P3” .
CONFIGURATION