EN
EN
A6U48 - A10U48
Mid & Long Range UHF Reader
24
25
m e n u
A d d T x
m e n u
A d d T x
m e n u
A d d T x
A d d
t o
R e l a y 1
A d d
t o
R e l a y 2
A d d
T x
A d d
B l o c k
W a i t
T x
0 0 0 0 0 0 0 0
H o w m a n y
T x ? 0 0 0
W a i t
T x
0 0 0 0 0 0 0 0
W a i t
T x
0 0 0 0 0 0 0 0
Once added, the button A will be associated
to relay #1 and button B to relay #2
Once added, the button A will be associated
to relay #1 and button B to relay #2
Button A
Button B
Button A
Button C
Button D
Button B
Scroll until
“menu Add Tx”
then press “P3”
Scroll until
“menu Add Tx”
then press “P3”
Scroll until
“menu Add Tx”
then press “P3”
Scroll until
“Add to Relay 1” or
“Add to Relay 2”
then press “P3”
Scroll until
“Add Tx” then
press “P3”
Scroll until
“Add Block”
then press “P3”
Type the number
of remotes to
add
Press the button you want to associate
with the previously selected relay.
or
type manually its serial number.
The serial number is printed on
the back of the remote .
(Note: use “P4” to shift left).
Press any button of the remote
or
type manually its serial number.
The serial number is printed in the back of the remote.
(Note: use “P4” to shift left).
The “Add Tx” menu is required in “Relay” mode ONLY. See “1. Set the operating mode (output)”.
You can add up to 100 remote controls. A remote control can activate either relay 1 or relay 2.
There are three ways to register a remote (Tx): one at a time, by associating a button to a specific relay
or in one block (batch).
Add remote in one block
You can also add many remote controls in one block (batch). The serial numbers of each remote control must
follow each other in series. Simply confirm the number of remote control to register and then present the first one
in the series .
Add remote and associate a button to a specific relay (“Relay” output mode ONLY)
Add remote one at the time
Press any button of the
first remote of the series.
or
The serial number is printed on
the back of the remote .
(Note: use “P4” to shift left).
ADDING REMOTE (TX)
