EN
EN
11
IFACE™
ievo iface™ Facial Recognition Terminal
Gang box mount
You can also install the device on a gang box (outlet box) by using the mounting plate.
1. Remove the screw that attaches iface
TM
to
the mounting plate and disassemble the
plate.
Keep the screw because it will be used to
attach them together again.
Make sure that the outgoing cables from the
gang box go through the rectangular opening
in the plate.
6] WIRING
Power Connection
DC Power Supply
1. Put the mounting plate onto the gang box
and attach it to the box with the screws
(M4 x 8).
2.
1. Connect the power cable and peripherals
cables, if necessary, to the connectors in
the rear panel. (See Connecting Cables for
more information)
3.
1. Put the device onto the installed plate,
slide it downward, and assemble with the
screw (M3 x 6)
4.
