-13-
Setting Image Display Mode
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET
button
four
times
.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press
KEY_2
button to set
the image display mode
to
Cycle switching
.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep
Press
KEY_2
button again
to set the image display
mode to
Zoom mode
.
UNLOCK Indicator:ON
TALK Indicator:ON
Press
KEY_2
Buzzer
Beep, Beep,Beep
Press
KEY_2
button again
and again to set the image
display mode to
Full screen
.
During setting mode, press
KEY-2
to switch
Cycle switching
mode
,
Zoom
mode and
Full screen
mode in cycle.
SETUP INSTRUCTIONS
Please
note
this setting
is
only for monitors
that
do not support manual
pan, tilt and
zoom functions, i.e. CDV47M, CDV43 & CDV24.
When
calling a
monitor
:
When
a call is placed from
door station
to a
monitor,
the image
is
displayed on screen
. T
here
are 3 modes for
the image
that can be
displayed
;
Alternate switching mode
,
Zoom mode
and
Full screen mode
.
Alternate switching mode:
when the monitor
is
called,
the image will
switch
between
Full
screen
and
Zoom
image
at a time interval of 5 seconds
.
Full screen mode:
when the monitor
is
called, the image will be displayed
in
Full screen
.
Zoom mode:
when the monitor
is
called, the image will be displayed on full screen for 5
seconds, then switch to
Zoom
image.
Alternate switching mode is
the
default
.
T
o change the setting, please
use the
follo
wing
steps:
•
If no operation is carried out within 10 s
the
setting mode
will exit
automatically.
•
To exit the setting mode manually press the
KEY_SET
button four times
.
•
While in the setting mode, the calling code
can
be
change
d
mode by pressing KEY
2
cyclically
.
•
The
LED_NAME
indicator will
continually flash
while in the
setting mode.
When answering the call
:
When answering the call, the image switching reminder can be activated or
deactiviated
.
If set to activated
,
the image switching reminder will be different for
each
image display mode
,
see below
.
Alternate switching mode:
When answering the call, image switching reminder is not
shown
.
Zoom mode:
When answering the call, the image will be displayed on
full screen
for 5 sec-
onds, then switch to
Zoom
image
as a
remind
er
to
enter the talk status
.
