Step 6: Now, it is possible to put all batteries in battery box following the picture
below (in the following drawing is indicated the fasten positions for the
correct batteries placing).
Note:
To install the second branch of batteries, repeat the same procedures on the
right side of battery box.
Step 7: Connecting the batteries following the wiring diagram shown in next
chapter.
Step 8: Put correct batteries inside with the metal plate.
Note:
To install the second branch of batteries, repeat the same procedures on the
right side of battery box.
Step 9: Put metal top cover back to the unit. Close the frontal fixing plate and the
two parts of the front panel and secure it with screws.
Step 10: Then, connect battery box to the UPS.
1-3K Battery pack rack
www.cdpups.com
English
