CDP NUEVO KAZA DT 390 LIVE MTR, Руководство пользователя

Страница: 9 / 23

9
 USB cable for database update.
6. Beginning to use the equipment.
This device can work connected to the LIVE Community or by itself if with its updateable local
database.
If you connect the device to the cloud, you will always have relevant information in real time in
a radius of 100 km. Remember that while you’re connected to the cloud, you may provide or
receive information from other LIVE Community users.
If you are going to use it connected to the cloud, request a copy of your SIM card with activated
data but with the PIN code request disabled (so a PIN code is not requested).
Insert the SIM card in the car lighter cable, as shown in the photo.
Connect the USB update cable to the unit and the PC, and then execute the update software.
Then, follow the instructions in point 15 of this manual.
In the car:
1. Connect the adapter cable to the car lighter and to the unit.
2. Fasten the detector through one of the three methods supplied. It should be facing forward and
as horizontal as possible; an incorrect placement considerably reduces the detections.
3. By default, the detector is off and the yellow star in the center of the compass is also off. The GPS
is activated and fully functional, and the device will work as a GPS warning unit.
To connect the detector, press the “R” or “C” key during 3 seconds as soon as you turn
on the unit until you hear “Consult the legislation in your country, radar activated”. At this
time, the yellow star will turn on. Now your device works as GPS warning unit and radar
detector.
C.D. Products S.A.