9
1)
Viewing and simultaneous recording of the front and rear camera
: If you install the rear camera
without connecting the red cable at + 12V and the black to the negative, the CDP 900 dashcam will record
simultaneously with the front and rear cameras (in two different directories of the SD). In addition, you
will have 5 viewing options, which you can select by pressing the up and down keys simultaneously (4 and
5).
These viewing modes are: view of front camera in full screen, view of rear camera in full screen, view of
front camera and rear camera view in reduced size, view of rear camera and front camera in reduced size,
and view of both cameras in half screen.
2)
Viewing the rear camera when using the reverse gear with parking guides
: If you connect the red
cable at + 12V and the black to the negative, the rear camera will only emit images when it is powered on,
i.e. when the reverse gear in the vehicle is used. To make the rear camera do this, you must connect it to
the reverse light of the car. When you use the reverse gear and the camera is connected, the image that
will be displayed on the screen of the dashcam will be the rear camera with parking guides. By pressing
the up and down keys (4 and 5) you can adjust the parking guides.
Troubleshooting
If you have problems during a normal operation, please carry out the procedures described below:
You cannot take photos or make videos:
Verify that the TF card has sufficient space or check if it is locked.
It stops automatically when recording:
Use a high speed TF card compatible with SDHC for a large volume of HD video data. A high speed TF
card can be identified as C4 and C6.
The message 'files error' appears when you attempt to view a photo or video:
Incomplete files can cause a storage error in the TF card. Please use the format function to format
your TF card.
Unclear or poorly defined video:
C.D. Products S.A.
