6
6.1. CALIBRATION DATE reminder
In this menu, you may see the days left until the next recommended calibration.
6.2. DATE-TIME setup
In the date-time setup menu, press the left button
to choose the category. The
item selected will appear in blue. Then press the right button
to change the value.
If you press the right button
the values will change one by one. If you press and
hold the button, the values will change continuously. Press the
button to exit the
date setup menu once you have finished. If the value has been changed, it will be
automatically saved when you exit the menu. The save interface will appear as a
reminder.
Important: The first row of numbers shows year-month-day from left to right.
The second row of numbers shows hour-minute from left to right.
6.3. MEASUREMENT UNIT setup
In the measurement unit setup menu, press the left button
to choose the unit and
then press the right button
to save the settings. Press the
button to exit the
menu. The new measurement unit will be automatically saved when you exit this menu
if a change has been made. After changing the unit, the alcohol concentration alarm
levels will be automatically updated and the conversion will also be done automatically.
6.4. BLOWING TIME setup
You may change the blowing time. Press the left button
to change this value, and
press the right button
to save the change. Press
to exit when you have
finished. The new blowing time will be automatically saved when you exit this menu if a
change has been made. If the value has been changed, it will be automatically saved
when you exit the menu. The save interface will appear as a reminder.
Suggestions:
1)
Set the blowing time within a broad margin, so the residual air in the
blowing tube is eliminated completely and the test is more accurate.
C.D.Products S.A.
