N-gene CDP Korea Inc.
User Manual Rev 3.0
[24]
Copyright 2012 ⓒ CDP KOREA INC.
[Clean the Sensor]
Clean the rubber gap rollers, idler rollers with slightly damp cloth. You may use a small
amount of liquid soap on the cloth. Ensure all soap residue is removed from the rollers.
Allow to dry thoroughly before connecting the machine to the mains power supply.
Clean the glass of CIS and US Sensor with a soft brush, then clean both CIS and UV Sensor
with a damp lint-free cloth, followed by a dry lint-free cloth to finish.
Clean the Magnetic Sensor carefully with a small soft brush. Avoid applying pressure to the
detector head which may damage the head resulting in loss of performance or an inability to
function. If there is a build-up of dirt on the surface of the magnetic head, clean with a damp
lint-free cloth, followed by a dry lint-free cloth to finish.
