The appliance is working, but not very well, check
•
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The door is closing properly.
•
The door gasket is sealing properly
•
There is enough ventilation at the side and rear walls.
•
The ambient temperature is between 1
6
°C to 38°C.
The appliance is noisy, check
•
The appliance is level and stable.
•
The cooling gas will make some noise, even when the compressor
is not running.
•
During operation, it is normal for the fan to run, even when the
compressor is not running.
The appliance is turning cooling on and off frequently
•
The internal temperature is fluctuating, causing the system to cool.
The light does not work, check
•
There is power to the appliance.
•
The house fuses or circuit breakers are intact and the fuse in the
plug has not blown.
•
The light button is not set to off (unlock the panel first as per page
7).
The door will not close properly, check
•
The appliance is level and stable.
•
If the door has been removed, it may not have been correctly
refitted.
•
Whether the door seal is dirty.
•
The shelves are positioned correctly.
The display shows “LL” or “HH”
•
The temperature sensor has failed. Please contact
CDA
Customer
Care.
Installing the wine cooler
This appliance is intended to be installed in a space between two
units. If it is to be freestanding in an open space, ensure that it can
not cause harm nor damage.
The minimum space required is:
Please note: When the product is installed
, the measurements
above will ensure a minimum 5mm ventilation gap around the
product.
F
ig.3
WCCF0152
15
8
mm (W) x 5
25
mm (D) x 830/8
85
mm (H)
WCCF0302
30
5
mm (W) x 570mm (D) x 830/8
85
mm (H)
WCCF0602
60
5
mm (W) x 570mm (D) x 830/8
85
mm (H)
WCCFO622
60
5
mm (W) x 570mm (D) x 830/8
85
mm (H)
Instruction Manual |
1
5
Please note:
The LED lighting cannot be replaced without a service call. If the light
fails, contact CDA customer care.
Instruction Manual |
1
4