6
| Instruction Manual
Instruction Manual |
7
Before first use
You must allow the appliance to settle for at least twenty four
hours prior to switching the power on.
It is recommended that you remove all internal and external
packaging and clean the interior of the appliance prior to first use.
We recommend that you use a solution of bicarbonate of soda and
warm water and then thoroughly dry the interior.
The appliance may have an odour to it at first use. This will
disappear as the appliance cools.
Please note:
•
The appliance will work continuously until it gets to the correct
temperature. Continuous noise from the compressor and
refrigeration system is normal
•
If the appliance is switched off, you should allow five minutes
before switching it on again to prevent the risk of unnecessary
damage to the compressor
•
The LED display may not show the selected temperature whilst
the appliance first gets to the correct temperature. This is
normal, and the display will be corrected automatically once the
appliance has run for a few hours
•
If the appliance does not have a freezer compartment (
)
it is not suitable for freezing foodstuffs.
Use
•
Only store wine in sealed containers
•
Do not overload the cabinet
•
Only open the door when necessary
•
Do not cover the shelves with aluminium foil or anything else that
will prevent air from circulating around the cabinet
•
To prevent damage to the door seal, ensure the door is fully
open before removing the shelves
•
This is a self-defrosting appliance. The compressor will not run
during the thirty minute defrost cycle
•
Do not pull the shelves beyond the anti-stop position
(approximately one third out) when fully loaded
•
This appliance is intended to be used exclusively for the storage
of wine
•
In the event of a power failure, leave the door closed as much
as possible to maintain the internal working temperature. Should
the power failure continue for a prolonged period, you should
take steps to protect the contents of the wine cooler against a
rise in temperature. The wine cooler will remember the selected
temperature settings and revert to these settings once the power
is restored
This appliance is suitable for use in an extended temperature
climate (ST) and has a normal operating ambient temperature of
16-38°C. Use of the appliance below 16°C may cause performance
issues that are not indicative of a fault. Normal operation will
resume once the appliance is within the specified range.