CDA SV430 Скачать руководство пользователя страница 7

General Settings and Use

To programme the oven
Turn the function control knob to the required programme.  
The display will flash the temperature preset for the programme (as detailed on pages 7 and 8) and after three seconds’ 
delay the display will stop flashing and the oven will start cooking.

To change the temperature, temperature selection must be active (the display will flash).  If the display is not flashing, 
touch   so the display flashes.  Then turn the selection control knob until the required temperature shows on display, 
and touch   to confirm the temperature selection.

To set the cooking time (the cooking starts immediately, and finishes at a programmed time), touch   once so the 
cooking time indicator flashes and the display shows 0:00.  Then turn the selection control knob until the required 
cooking time (in minutes) shows on the display, and touch   to confirm the cooking time selection.  The cooking time 
indicator will stay lit and the cooking time will show on the display.

To set a delayed programme (the cooking starts and finishes at a programmed time), first set the cooking time as above, 
then touch   twice so the end time indicator flashes and the display flashes the time the programme is due to end 
(current time + cooking time).  Then turn the selection control knob until the required end time shows on the display, 
and touch   to confirm the end time selection.  The cooking and end time indicators will stay lit and the cooking time 
will show on the display.  The oven light will switch off, and switch back on when cooking starts.

To cancel a programme, touch   once so the cooking time indicator flashes, then turn the selection control knob until 
the display shows 0:00.

At the end of the programme, the oven will beep intermittently for two minutes, and the cooking time indicator will 
flash.  To stop the beep, touch   or  .  

Please note: The function control knob must be turned to 0 to switch off the oven completely.

If the oven must be preheated, switch on the oven as above. Once the preheat is complete, the upper bars on the 
temperature indicator on the display will stay lit and the oven will beep three times, pause, and beep three times again.

6

Содержание SV430

















Отзывы: