15
Programming The
Main Oven
Please note:
•
The semi-automatic and automatic
cooking programmes will only work
with the main oven.
•
The alert beep will cut off after
two minutes if it is not switched off
manually.
Setting the clock
The clock is preset to 12:00, and will revert to this after a power
failure.
When the current time indicator is flashing, touch or . When
the correct time is shown on the display, the clock will set after
approximately five seconds’ delay.
To change the clock once it has been set, touch repeatedly until
the current time indicator flashes, then touch or . When the correct
time is shown on the display, the clock will set after approximately five
seconds’ delay.
The minute minder
The minute minder can be used when the oven is switched on or off.
It can be set for up to 23 hours and 59 minutes.
To set the minute minder:
•
Touch repeatedly until the minute minder indicator flashes.
fig. 1
5
6
7
1 Cooking time indicator
2 End of cooking time indicator
3 Minute minder indicator
4 Current time indicator
5 Decrease key
6 Mode key
7 Increase key
1
2
3
4
