manualshive.com logo in svg

CDA RC 9322, Руководство по установке, использованию и обслуживанию

Поделиться
Скачать
CDA RC 9322 Скачать руководство пользователя страница 41

41

OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF THE INJECTORS OF THE 

OVEN AND GRILL BURNERS

Some models are provided with a set of injectors for the various types of gas.

If the injectors are not supplied they can be obtained from the “Service Centre”.

Select the injectors to be replaced according to the “Table for the choice of the injectors” (for the 

gas category check the data label attached on the appliance).

The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each 

injector.

OVEN BURNER

• 

Lift and remove the lower panel inside the oven.

• 

Unscrew and remove the burner securing screw “

A

” (fig. 50).

• 

Withdraw the burner as shown in figure 6.4b and rest it inside the oven. Take care not to da-

mage the safety valve probe and the electric ignition electrode.

• 

Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 51) and replace 

it with a new one selected in accordance with the “Table for the choice of the injectors”.

• 

Regulate the air supply to the oven burner as indicated in the section “REGULATION OF AIR 

SUPPLY TO OVEN AND GRILL BURNERS”; then replace the burner repeating the above steps 

in reverse order.

 

IMPORTANT: Check the correct operation of the safety valve and the electric  ignition.

A

Fig. 50

Fig. 51

Содержание RC 9322

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды