CDA RC 9322 Скачать руководство пользователя страница 29

Страница: 29 / 48

For the Installer

Location

The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space

containing a bath or a shower.

The appliance must not be installed in a bed-sitting room of less than 20m

The appliance is designed and approved for domestic use only and should not be installed in a commercial ,

semi commercial or communal environment.

Your product will not be guaranteed if installed in any of the above environments and could affect any third

party or public liability insurances you may have.

This can be installed next to a cabinet.

•

If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a gap of at least

200 mm must be left between the side of the cooker and the furniture.

•

The furniture walls adjacent to the cooker must be made of material resistant to heat.

•

The veneered synthetic material and the glue used must be resistant to a temperature of 90°C in order to

avoid ungluing or deformations.

•

Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.

•

It is essential that the cooker is positioned as stated below.

•

If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling out.

•

The cooker must be installed by a qualified technician and in compliance with local safety stan-

dards.

650 mm

500 mm

200

450 mm

air vent

Fig. 34

Содержание RC 9322

















































Результаты поиска

Содержание RC 9322

Отзывы:

Бренды по названию

Популярные бренды

CDA RC 9322, Руководство по установке, использованию и обслуживанию

Результаты поиска

Содержание RC 9322

Отзывы:

Бренды по названию

Популярные бренды