8
Using your Hob
To switch the zone on
•
Touch the key for the zone required. The zone display will flash 0
and the hob will beep to confirm the hob is on.
Please note:
If a power level is not set within five seconds, the zone
will switch off automatically.
To set the power level
•
Touch the keys to increase the power level from 1 (lowest) to P
(maximum), and the key to reduce it.
•
To go straight to P, touch the key when the zone is switched on.
To turn the power off
•
Touch the key for the zone used or reduce the power level on the
zone by touching the key until the zone display switches off.
Direct power key
•
The hob is equipped with a direct power key to allow access to a
specific power level for ease of use, with a factory preset of
power level 8.
•
After turning the power on for the zone required, touch the direct
power key. To change to any other power level, touch either or
keys until the required power level is shown on the zone display.
•
It is possible to adjust the power level on the direct power key if
necessary. To do so, when the hob is switched off, touch the
direct power key for approximately five seconds until the hob beeps
and the display shows the current power level. Touch the or