CDA HVN91 Скачать руководство пользователя страница 11

11

You can have a maximum of three automatic programmes set at once: 
one of the left two zones, one of the central two zones and the right 
zone.

The timer

   The timer allows you to preset the length of time any of the zones will 

be on, between a minimum of one minute and a maximum of ninety-
nine minutes. The timer can be used on each zone separately.

To set the timer

  First switch on the zone and set the power level.

   Touch either the   or   keys until the timer display shows the required 

duration.

   To go straight to the maximum 99 minutes, touch the   key once 

when the timer is switched on.

Please note:

  The timer will only count down when the cookware is on the zone.

   The timer will count down in minutes, and then in seconds for the last 

minute.

   At the end of the set time, the zone will switch off, the timer will flash 

0 and the hob will beep for approximately 20 seconds.  To switch 
off the alert, touch any key for that zone.

To change the timer once set

     Touch  the   or   keys until the timer display shows the required 

duration.

Содержание HVN91





























Отзывы: