background image

2

Important

This appliance is designed and manufactured solely for the cooking of domestic (household) food and 

is not suitable for any non domestic application and therefore should not be used in a commercial 

environment.

The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a 

semi commercial, commercial or communal environment.

These instructions are only valid for those countries whose identification symbol appears on the cover 

of the instruction booklet and on the appliance.

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or instal-

lation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with 

this product following incorrect installation or misuse of the appliance.

Appliance Information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care 

in the event of a fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

Declaration of CE Conformity

This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating 

rooms) should be considered incorrect and therefore dangerous.

This hob has been designed, constructed and put on to the market in conformity with:

 

Safety requirements of EU Directive “Gas” 2009/142/EC;

 

Safety requirements of EU Directive “Low Voltage” 2006/95/EC;

 

Protection requirements of EU Directive “EMC” 2004/108/EC;

 

Requirements of EU Directive 93/68/EEC.

Содержание HVG 4Q5 Series

























Отзывы: