background image

17

Care and Maintenance

Always disconnect the appliance from the power supply before 
undertaking any cleaning or maintenance.

Important: 

  Steam cleaners must not be used when cleaning this appliance. 

 

   You should use a non-abrasive cleaner to clean the hob top.  Any 

abrasive cleaner (including Cif) will scratch the surface and  

 

 

could erase the control panel markings. 

   Sugar and starch can cause permanent damage to the surface of the 

hob.  Wipe away any spillages immediatly.

 

If your hob is not working:

1.   Check that the zone is switched on.    

 

 

 

 

2. Check that the mains supply has not been switched off. 

 

 

3. Check that the fuse in the spur has not blown.

Types of residues

Clean with

Cleaning advice

Light

Cleaning sponge and soft 

cloth

Wipe over the zone to be cleaned with a 

sponge and hot water, and then wipe off with a 

soft dry cloth.

Accumulated baked-on 

stains/dirt, sugar spills or 

melted plastics

Cleaning sponge or glass 

scraper and soft cloth

Wipe over the zone to be cleaned with a 

sponge and hot water, using a ceramic scraper 

to remove any large marks or stains and then 

wipe off with a soft dry cloth.

Rings and hard water 

residues

White vinegar and soft 

cloth

Pour a small amount of warm white vinegar 

onto the stain, leave it to stand, and then wipe 

off with a soft dry cloth.

Shiny metallic streaks

Cleaning agent for 

vitroceramic glass 

etc.) Slow boiling, e.g. 

spaghetti, soups, stews, 

potatoes

Use specialist vitroceramic glass cleaner 

(preferably one with silicone for its protective 

properties)

Содержание hn6840





























Отзывы: