CDA HCN610 Скачать руководство пользователя страница 8

Types of residues

Clean with

Cleaning advice

Light

Cleaning sponge and soft cloth

Wipe over the zone to be cleaned with a sponge and hot 

water, and then wipe off with a soft dry cloth.

Accumulated baked-on stains/

dirt, sugar spills or melted 

plastics

Cleaning sponge or glass scraper 

and soft cloth

Wipe over the zone to be cleaned with a sponge and hot 

water, using a ceramic scraper to remove any large marks 

or stains and then wipe off with a soft dry cloth.

Rings and hard water residues

White vinegar and soft cloth

Pour a small amount of warm white vinegar onto the 

stain, leave it to stand, and then wipe off with a soft dry 

cloth.

Shiny metallic streaks

Cleaning agent for vitroceramic 

glass etc.) Slow boiling, e.g. spa-

ghetti, soups, stews, potatoes

Use specialist vitroceramic glass cleaner (preferably one 

with silicone for its protective properties)

Care and Maintenance

Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.

Important: 

   S

team cleaners must not be used when cleaning this appliance.   

 

 

 

 

   You should use a non-abrasive cleaner to clean the hob top. Any abrasive cleaner (including Cif) will scratch the surface  

  and could erase the control panel markings. 

   Sugar and starch can cause permanent damage to the surface of the hob. Wipe away any spillages immediatly.

 

If yor Hob is not working:

1.   Check that the control knob is switched on.  

 

 

 

 

 

 

2.   Check that the mains supply has not been switched off. 

 

 

 

 

 

3.   Check that the fuse in the spur has not blown.

Contact CDA Customer Care

A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY 

 

T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu

Содержание HCN610

















Отзывы: