21
Locate the washers and screw the
nuts onto the adjustment bolts.
Fig. 12 - Aligning the decor door
Close the door and check the
alignment with the other unit doors.
Adjust the decor door by screwing or
unscrewing the adjustment bolts for
vertical adjustment and by the help
of the slots on the fixing bracket for
other directions. Lock the screws into place as shown in Fig. 12.
Fitting the decor door base fixings
With the appliance door open, locate the metal decor door base
fixing brackets and screw the fixings to the decor door. You may
need to remove and re-fit these brackets depending upon the
decor door used.
Fitting the decorative cover
Re-fit the decorative cover, that you removed in the first step, on to
the decor door fixing bracket. Check that the whole door assembly
operates smoothly and that the door seal of the refrigerator is still
creating a seal.
Important: After completing the installation, check that the
appliance is secured within the unit and that the door(s) close
and open properly. If there is no resistance from the door seals
when opening the doors, then it is probable that the appliance
and/or decor doors are not fitted properly.
10
8
Fig. 12
