Instruction Manual |
13
Installation
• We recommend that you seek the help of another individual
when installing this product. Always wear adequate PPE
(Personal Protective Equipment).
• The fixings supplied are suitable for most installations. It is the
responsibility of the installer to ensure that the fixings are suitable
for the wall type in the property.
IMPORTANT
: When preparing to connect the extractor to the
mains power supply, that the electrical connection to the extractor
should not be located inside the boundaries of the chimney. This
is especially important if the extractor is to be used in recirculation
mode. There must be an isolation switch, which is easily accessible
after installation, so that the extractor can be disconnected from
the mains electrical supply.
