CDA EDD62, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 16

6 | Instruction Manual
Care and Maintenance
IMPORTANT: DO NOT PERFORM MAINTENANCE OR
CLEANING OF THE EXTRACTOR WITHOUT FIRST SWITCHING
OFF THE ELECTRICITY SUPPLY.
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and could erase the control
panel markings.
You can clean your extractor effectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean cloth.
Cleaning the grease filter
The grease filter should be kept clean to minimise the risk of fire.
At least once a month you should remove and clean the grease
filter with hot soapy water. You can also wash the grease filter in
a dishwasher, ensuring that you place it in an upright position to
prevent damage from other items in the dishwasher. After rinsing
and drying, replace the filter.
To remove and replace the grease filters
• Touch the On key so the moving panel raises to its full extent,
then isolate the power supply so it stays raised
• By pulling the two top corners of the front glass panel at the
same time, it will be released and pivot toward you
• The grease filter can then be pulled forward and out
• Replacement is a reversal of the removal procedure
Please note:
Cleaning the grease filters in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with
the appliance.