8
To remove the grease filter
•
Open the hinged panel as shown in Fig. 3.
•
Push in the button on the handle and then pull down on the filter at
the top as shown in Fig. 4.
•
When you have released it at the top, then you can pull the filter out
completely.
After rinsing and drying, reassemble the grease filter to the hood by
reversing the removal process.
Please note:
Cleaning the grease filter in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with the
appliance.
Changing the charcoal filter (re-circulating only)
To ensure best performance of your extractor, you should replace the
charcoal filter every four to six months, depending on use.
To attach a charcoal filter:
•
Remove the grease filter as described above.
•
Offer up the charcoal filter so that the magnetic pins are facing
upwards, one to the rear and one to each side. The filter will be
held in place by magnetic force.
•
Finally, replace the grease filter.
IMPORTANT:
Steam cleaners must not be used to clean this
appliance.
