12
Mounting Your
Extractor
Your extractor can be used to filter and
recycle the air within your kitchen, or to
extract the air outside.
When installing this appliance over a
CDA hob, the clearance between the
extractor and the hob must be equal
to or exceed 550mm. This instruction
overrides the instructions supplied with
the CDA hob. (The height should be
measured from the top of the hotplates
or burners).
Where the extractor is to be installed
above a non-CDA hob, the instructions
supplied with the hob may dictate that
the height required above the hob is
greater than 550mm.
IN THE ABSENCE OF ANY INSTRUCTIONS SUPPLIED WITH A
GAS HOB, THE MINIMUM DISTANCE BETWEEN THE HOB AND
EXTRACTOR MUST BE AT LEAST 760mm.
The width of any hob must not be greater than the width of the
extractor installed above it.
Fig. 6
Gas: 550mm minimum
Electric: 550mm minimum
ECA
EVA
A
138
138
B
282
282
C
85
85
D
75
75
A
B
C
D
