CDA CTE61, Руководство по установке, использованию и техническому обслуживанию

Страница: 12 / 18

12
Installation - mounting the extractor
This extractor is designed to be installed within a bridging unit and is
not suitable for direct wall mounting. It is intended to be held in place
within the unit by four screws through a support shelf. The positions of
these screws, and the ducting outlet cutout, are shown on a template
supplied with the appliance. In the unlikely event of the template
being missing, the below measurements may aid you.
To achieve a flush fit with a decor door on the bridging unit, adjust the
depth of the cutout by an amount equal to the difference between
either 18 or 25.6mm and the thickness of the decor door.
Please note
that the canopy lip is shaped. The upper edge, which the decor
door will meet, is 18mm thick.
462
Ø118mm
500
223
134
600
40
26
284
Max38 Min23
50
250
250
19
19
Max430 Min310
78,5
40
30
279
Fig. 3