15
display will show “P--2”, a further press of the “Extra Rinse” button
selects the maximum of 3 extra rinses with the display showing “P--3”.
The “Extra Rinse” light is illuminated and flashes during the
programme, “P--1/2/3” is displayed, alternating with the remaining
programme run time.
Intensive
Pressing the “Intensive” button before starting a programme selects
this function. This increases the washing time during the main wash
stage of the programme and is ideal for washing dirty loads.
Dry
This function adds a drying cycle to the end of a programme. The
drying cycle adds up to 2 hours to the duration. The display shows the
full duration of wash and dry cycles.
To use this function, press the “Dry” button a number of times. It will
cycle through 30-60-90-120 minutes of drying. Stop pressing the
button when you reach the desired time.
Please note:
The 120 minute setting uses a drying sensor, in this
setting only heat is applied to the load until it is dry but the drum will
continue to rotate for the full 120 minutes to reduce the chance of
creasing.
The drying function is only available on certain programmes - see the
programme list on page 17.
Please note:
If the machine is filled to its maximum capacity for some
wash cycles, it will be necessary to split the load into 2+ batches for
