8
Changing the charcoal filters (re-circulating only)
To ensure best performance of your extractor, you should replace the
charcoal filters every four to six months, depending on use.
To attach the charcoal filters:
•
Remove the grease filter panel as described above.
•
Position the charcoal filters in the slots at the rear of the filter panel.
•
Replace the grease filter panel as described above.
IMPORTANT:
Steam cleaners must not be used to clean this
appliance.
If your extractor is not working:
1. Check that the mains supply has not been switched off.
2. Check that the fuse in the spur has not blown.
If the speed drops without you touching a button:
This is likely to be the energy saving feature described above: The
fan speed automatically reduces from the higher speeds after a pre-
set running time, to save power.
The LED Lamps
The LED lamps are long-life items that are not designed to be
replaced by the user. In the unlikely event of a lamp failure, contact
CDA Customer Care for assistance.
