CDA 12247.3eTePrDpScJNkVUtS, Использование и обслуживание, Страница: 25 / 40

Instruction Manual | 25
Cleaning and maintenance
Fig. 5
Fig. 6
Important: Do not disassemble
the door without it having been
removed from the oven. Weight
differences could cause the door to
snap shut, causing damage to the
oven and/or the user
Removing the inner door glass
With the door removed, the inner
glass can also be taken out for
cleaning purposes.
• Use a phillips screwdriver to undo
and remove the screws in the
upper door slat
• Use a flathead screwdriver to
unhook the door slat, as shown in
fig. 5
• Remove the door slat, as per fig.
6, and place it somewhere safe
where it will neither receive nor
cause damage
• Remove the inner glass from
the blocks it is seated within
(near to the hinges) and place
this somewhere safe also. Pay
attention to the way that the glass
is facing as it will need to be
replaced in the same direction.
The smooth surface of the glass
should be facing upwards (inwards if the door was back in place)
with the patterned side facing the oven door handle
• Clean the door glass with warm, soapy water and wipe dry with a
clean microfibre cloth