HD Mule Instructions
Installation
1.
Ensure that the HD or analogue camera is connected to
the Mule Transmitter (
marked Tx
). The Mule units are not
waterproof and must be installed in water proof boxes if
installed outdoors.
2.
Connect the camera video feeds to the BNC connections
marked IN 1 and IN 2 on the Mule Tx. If using the unit
as a combiner for RS485 data transmission, connect to IN 1
using a BNC to terminal adapter (CON380) at each end.
3.
Take a coax cable from the single video out BNC
connection on the back of the transmitter to the single
BNC in connection on the Mule Receiver. Connect BNCs
from the respective video outputs on the Mule Receiver to
a compatible DVR or suitable equipment.
4.
If using the RS485 connection, only one video stream can
be used as well. The RS485 works in the alternate direction
to the video. i.e. from receiver to transmitter.
Powering The Units
The MULE102 units are powered with a 12V DC input connected to the 2.1mm DC socket. The
Transmitter
requires a minimum of 60mA and the
Receiver
requires a minimum of 275mA. To
power the units we recommend 12V DC PSU supplying no less than 500mA to each unit.
© Copyright CCTVMule 2018
For more information email:
or visit:
www.cctvmule.com
Transmitter (Tx)
Receiver (Rx)
Compatibility
TVI (3MP) / CVI / AHD / Analogue
Video
Connection
2x BNC Inputs /
1x BNC Output
1x BNC Input /
2x BNC Outputs
Data Connection
BNC Socket
Power
12V DC (PSUs Required)
Consumption
60mA
275mA
Max Transmission
500m (Standard RG59)
Operating
Temperature
-30°C ~ +50°C
Case Material
Aluminium Alloy
Weight
67.5g
Dimensions
64 x 42 x 23mm
Technical Specification
All specifi cations are approximate. We reserve the right to change any product
specifi cations or features without notice. Whilst every eff ort is made to ensure
that these instructions are complete and accurate, CCTVMule cannot be held
responsible in any way for any losses, no matter how they arise, from errors or
omissions in these instructions, or the performance or non-performance of the
equipment that these instructions refer to.
WEE/CG0783SS
This symbol on the products and/or accompanying documents
means that used electronic equipment must not be mixed with
general household waste. For treatment, recovery and recycling
please return this unit to your trade supplier or local designated
collection point as defi ned by your local council.
