4/8-channel H.264 DVR User Manual
11
3.2 Recording mode
Enter the Recording Mode screen from “Main Menu”—“Record”, as shown below:
Channel:
used to select if the video recording function is enabled for the corresponding
recording channel.
RESOLUTION:
available in the 3 levels of D1
704*576
, HD1
704*288
and CIF
352*288
(
Note:
This option is available for 4-channel DVR only, and the resolution
of 8-channel DVR is CIF by default .)
QUALITY:
available in the 3 levels of high, normal and low, corresponding to the 3 data
stream standards of high, normal and low bit rates.
Frame rate:
adjust frame rate
AUDIO:
switching on or off audio recording.
REC.MODE:
available in the two modes of startup recording and timing recording.
When powered up:
starting recording when this unit is energized (It works only if
the corresponding channel is enabled in the “Channel” option.)
BY TIME:
performing recording as scheduled. When “timing recording” is selected,
the “Record Time Configuration” button will appear on the right. Move the cursor here
and press “Enter” to enter the Record Time Configuration screen, as shown below:
Channel:
You may choose either “All” or a single channel.
Time configuration:
First select from the 3 modes of alarm recording, general
Recording and no recording for your desired recording mode for a certain lattice,
and configure specific recording time lattices (each lattice represents 1hr). Each
lattice can be configured into different recording modes by marking them into
different colors, such as red, green and background color, which represent alarm
recording, general recording or no recording within each hour respectively.
FILE LENGTH:
Left-click or press “Enter” to select the File length, with the 4 options of
Содержание JE-D7004
Страница 1: ...1 4 8 channel Embedded Digital Video Recorder...
Страница 48: ...4 8 channel H 264 DVR User Manual 1...