DWELL TIME
: Dwell time between A to B is 2s to 60s selectable.
RUNNING
: Running the A-B scan. Check Fig. 4.3.4.2.
DELETE
: After deleted, the preset points of A and B display as 0. While the exact preset
point information doesn’t be deleted. So it is convenient for user to select the preset point
needing to be scanned. Speed and dwell time will reset as default setting.
4.3.5 Pan Scan
PAN SCAN SPEED
: Pan scan speed is 1 to 64 grade selectable.
INIT
: Reset the scan speed and tilt degree as default setting.
RUNNING
: Running the scan speed and tilt degree set.
4.3.6 Park Action
PARK MODE
: Park mode includes OFF, Park action, A-B scan, Pan scan, guard tour 01,
guard tour 02, guard tour 03 and Preserve action.
When park mode is OFF status, the dome doesn’t run park mode.
When park mode is PRESERVE ACTION status, it records previous action
order(A-B scan, Pan scan, Guard tour 01, Guard tour 02, Guard tour 03).
Example
: Running A-B scan at first, when the action stops unexpectedly, it enters the park
mode to continue to run A-B scan.
PARK TIME
: Park time is 01~60 Mins selectable.
SETTING
: After entering the OSD menu, as 4.3.6.2, move to the desired position and save
the settings.
RUNNING
: Running the park action, if there is no setting, system will remind that “Please
set park action”.
DELETE
: Delete the settings.
<PAN SCAN>
PAN SCAN SPEED 20
INIT
RUNNING
EXIT
PAN SCAN
RUNNING…
LEFT KEY TO EXIT
PAN: XXX TILT: XX
<PARK ACTION>
PARK MODE OFF
PARK TIME 01M
<SETTING>
RUNNING
DELETE
EXIT
<PARK ACTION>
PRESET 1: SAVE
PRESET 2: BACK
