33
External Control / External
Trigger Input Cable
(EXCB2-M10M20-3
)
External Control / External
Trigger Input Cable
(EXCB2-M10M20-3
)
External Trigger Input Cable
(EXCB2-M10-3)
External Trigger Input Cable
(EXCB2-M10-3)
External Control Cable
(EXCB2-M20-3
)
1
1
2
Press the connector in until it locks in place.
Release the lock and remove the connector.
4
Connections
1
Connect the LED Light
Connect the connecting cable to the LED Light Unit to the output connector on the Control Unit.
Insert the connector to the Light Unit all the way in.
Press the lock and pull out the connector.
SMP-03V-BC
SMP-03V-BC
ELR-02V
ELR-02V
3
Connect the External Control Cable
(Optional item, sold separately)
4
Connect the External Trigger Input Cable
(Optional item, sold separately)
To use ON/OFF Mode or Strobe Mode, connect the external trigger input
cable to the external trigger input connector.
An optional External Trigger Input Cable (EXCB2-M10-3) (sold separately) is available.
In case using a self-made cable, cable length should be within 3 m at maximum.
Press the connector in until it locks in place.
Release the lock and remove the connector.
1
2
1
2
Before connecting the Control Unit, make sure that the main
power source is turned OFF. Making connections with the
power turned ON may result in a fire or electric shock.
WARNING
Connecting
Removing
Connecting
Removing
Connecting
Removing
To perform external control, connect the external control cable to the external control connector.
An Optional External Control Cable (EXCB2-M20-3) and an Optional External
Control/External Trigger Input Cable (EXCB2-M10M20-3) is available.
(The external control and external trigger input can be connected with one cable.)
In case using a self-made cable, cable length should be within 3 m at maximum.
1
2
1
5
What You Can Achieve with This Control Unit
Select the control mode and lighting mode from the following Application Guide and proceed to the indicated reference items.
The Light Units are always ON.
The Light Units are turned ON or
OFF according to the external
trigger signal input.
Power ON
Power OFF
Lit.
Not lit.
The Light Units are turned ON for
a set time after the external trigger
signal is input.
Control Mode
Lighting Mode
Front panel operation
External control using a PLC
or image process device
Application Guide
9
Inputting the External Trigger
To use external control in Strobe Mode,
refer to items , , , and under
and
.
1
3
4
2
8
Control with External Signals
To use external control in ON/OFF Mode,
refer to items , , and under
and
.
1
3
2
9
Inputting the External Trigger
8
Control with External Signals
To use external control in Continuous Mode,
refer to items , , and under
.
1
3
2
8
Control with External Signals
9
Inputting the External Trigger
To use manual control in ON/OFF Mode,
refer to items , , and under
and
.
7
Manual Control
1
3
2
To use manual control in Continuous Mode, refer to
items , , and under .
7
Manual Control
1
3
2
9
Inputting the External Trigger
7
Manual Control
To use manual control in Strobe Mode,
refer to items , , and under
and
.
1
3
4
2
Photocoupler OFF
Photocoupler ON
Lit.
Not lit.
Not lit.
* When the Trigger Logic
Switch is set to HIGH
Photocoupler OFF
Photocoupler ON
Lit.
Not lit.
Not lit.
* When the Trigger Logic
Switch is set to HIGH
Continuous Mode
ON/OFF Mode
Strobe Mode
2
Connect the AC Cord
The AC cord that is included with the Unit is for 100 to 120V AC. We recommend using the
following for 200 to 240V AC. Cable: GTCE-3 x 1.0 mm
2
(manufactured by Kawasaki Electric
Wire Company), Connector: KS-31AY (manufactured by Kawasaki Electric Wire Company)
Connect the power cord to the Control Unit and a wall socket. The Control Unit will turn ON when
power is supplied from the main power source. When the Unit is ON, the digital window will light.
Digital Window
The light intensity of the
lowest channel is displayed.
(Display when no Light
Unit is connected)
Connect the AC power cord to the AC inlet and a wall socket.
*Data that has been
set is retained even
after the power is
turned OFF with
manual or external
control.
Connect 24V DC Light Units to the 24V LIGHT output connectors, and Spotlights to
the HLV LIGHT output connectors. One of the 24V LIGHT output connectors is an
ELR-02V connector for a High-output Light Unit.
