BRIO-A300C 21/03/2011
CCEI S.A.
- 6 -
V1.0
Audio installation
After having done the installation as described above, turn on the
transformer. The floodlights should light up green and then flash,
confirming that the BRIO A300 C has been detected.
Operation
Description of the components
Light indicator lamp :
This is lit when the floodlights are on, regardless of the mode or colour
selected.
PLC indicator lamp:
This lamp is lit while on/off orders are being sent to the floodlights
(Radio-frequency). This is lit when data is being received from the remote control.
If this
lamp is often lit when no order is being sent by the remote control, that means there is
some radio interferences
Displays mode:
These display the selected mode.
Key:
This is used to select a mode.
« + » Key :
This is used to change the function within a mode.
Validate key :
Is used to validate the entries. It also serves as ON/OFF switch.
Mode displays
Mode key
« + » Key
Validate key
RF indicator
lamp
PLC indicator
lamp
Light indicator
lamp
