ENGLISH
12
6.
Troubleshooting
In case the lamp
doesn’t turn on
:
➢
Check that the lamp is
properly wired to the supply
voltage.
➢
Check that polarity wiring has
been carried out correctly.
Please contact CCEA’S
USA Technical
support service in case the lamp is
defective
CCEA Technical Support Service
Phone: +39 0444 572083
7.
Replacing the Led light
source
The outstanding lifetime of the
LED light source, over 60.000
hours, makes it unnecessary to
replace the PCB LED if the lamp is
properly
installed
and
used
following the instructions in this
manual. Please contact CCEA
’s
Technical Support service - or your
Reseller
–
in case the replacement
of the PCB LED is needed for any
defects not covered by the
warranty.
8.
Product
maintenance
and cleaning
Switch off the power supply
before
any
installation,
maintenance,
or
reparation
procedures.
This product is maintenance-
free.
➢
Lamp cleaning is to be carried
out only after it has been
switched off and surfaces have
cooled.
➢
Carefully rinse the lamp
surface with a mild cleanser
and then wipe off using a soft
cloth in order to avoid scoring.
All material damages caused by
liquid leakage may damage the
lamp.
WARNING
NOTICE
Maintenance
