Repairs
ENGLISH
10
Once the right position is found,
tighten both screws
ATTENTION! When side mounting the
lamp ensure to never completely
loosen the M6 screws allowing for
lamp rotation, to avoid having the
lamp fall down.
➢
Proceed in connecting the lamp
to a power source
Correct installation using HNFX02
The item HNFX02 is made of:
-
N.1 painted swivel bracket
-
N.4 M5x16 screws
-
N.4 squared nuts supplied with
the lamp
➢
Mark out the positions of the
fastening holes on the installation
surface. See the sizes table on
page 8 (HNFX01) for the drilling
center lines.
➢
Fasten the swivel mounting
bracket to the lamp by tightening
the screws at the four sliding nuts
in the two lanes on the back of
the lamp.
➢
Fix the lamp to the structure
(pict.7). Use M5 screws.
➢
You
can
adjust
the
lamp
inclination by unscrewing the 2
M5 screws of the base (see
picture
below).
Once
the
inclination defined, tighten the
screws (pict.8 and 9).
NOTICE
Collegamento elettrico
Picture 06
NOTICE
➢
Damaged or broken lamp.
The brackets as well as the screws
tightening have to be checked on a
regular basis.
Picture 07
Picture 08
Picture 09
