ENGLISH
Attached to COMPACT.ALPHA_User Manual_06.05.2019 Rev1_19/07/19
9
4.3 Installation
The lamp fall-down may cause
damage to persons and objects
➢
When mounting the lamp ensure
that the original fastenings are
used, which you may purchase
from the supplier.
➢
Have the fastening accessories
correctly mounted.
Switch off the power supply before
proceeding to installation.
Correct installation using only the
original fastenings CAFX01
The
COMPACT.ALPHA
mounting
accessories are made of:
-
N.2 side fasteners of chrome-
plated steel with M3 fixing screws
and steel handle washers.
-
Direction of the luminous flux
adjustable at +/- 70°.
Installation with CAFX01 side-
mounting brackets
➢
Hook the two side brackets on
the lamp sides using the 2
screws provided.
➢
Bore the fixing holes on the
machine surface, as shown
hereunder (Side mounting pitch):
Model
L(mm)
CA0121SXY
232 (9,13in)
CA0221SXY
382 (15,05in)
CA0321SXY
532 (20,94in)
CA0421SXY
682 (26,85in)
➢
After the mounting holes have
been made, fix the lamp to the
machine structure using M5
screws of at least 8 mm. length (2
screws for each fastener). The
plate where the lamp will be
mounted has to be at least 2 mm
thick.
➢
The lamp position can be
adjusted by rotating the same
with respect to the standing
surface once the two M3 screws
on each side have been loosened.
Once the right position is found,
tighten both screws (see picture
hereunder).
ATTENTION
WARNING
Installation
Picture.05
