4. Install Mounting
Bracket to Table
The mounting
bracket is designed to
integrate with the C-Leg
used in HorizonLine™ and
Pi™ table systems. It may
also be installed to the
under surface of any table
with sufficient clear space
for the CPU.
Use the bolts provided
with HorizonLine™ or Pi™
table legs to mount the
bracket using the common
plate holes.
If mounting to table
surface without C-leg
system, provide your own
screws or bolts appropri-
ate for table thickness.
5. Slide Onto Mounting Bracket
Slots on the top pan slide over studs on the mounting
bracket. Slide the locking hole tab through the slot in the
mounting bracket.
Use the wire clip to interlock the bracket with the Li’l Brig™.
The wire clip, provided for this purpose, is easily re
-
moved. You may wish to use a cable tie or your own
combination lock for added security.
©2010 CBT Supply, Inc. All rights reserved
